Are you planning to take the Amazon Maintenance Technician test but don’t know the test pattern? Are you worried about achieving good results with limited time to prepare for the test? Well, in that case, you are at the right place!
Ramsay has built a unique assessment specifically for Amazon, known as the Amazon Maintenance Technician Test. This advanced-level test consists of 75 Multiple Choice Questions (MCQs) based on 6 to 7 topics.
Finding the right practice aptitude tests today has never been easier; check this site out for access to free sample questions.
Whether you want to work as an Amazon RME Technician or Maintenance Technician, you need to grasp mechanical principles.
This 2.5-hour and 75 multiple choice test will cover everything from building circuits to hydraulics, along with a host of physics principles necessary to get the job done.
The Ramsay Corporation has achieved a top position as the advanced technical test provider. Not just for Amazon, but USPS and Walmart are also engaged in acquiring their services for their technical departments.
This test is compulsory for all those who want to qualify as maintenance technicians at Amazon. Their job is to ensure that the machines allow for high standards and have preventative maintenance performance.
Test takers find it difficult to pass because you need at least an 80% score to cross the barrier. But, the scoring threshold can even be higher based on the scores of competing candidates.
If you are not well prepared, you will find it difficult to get through your exam. The best thing you can do is to have a deeper look at the sample aptitude tests available online.
The more practice you have with accurate preparation tests the closer you will draw to passing the Ramsay Mechanical Aptitude Test in one go.
Below are the three levels of the Amazon Maintenance Technician Ramsay Test:
Amazon Maintenance Technician Test 1 is an entry-level test. This test focuses on the experience you gained while doing your apprenticeship.
Further, let’s discuss the most important test types out of all three: The tech 2 test and Tech 3 test.
Amazon Maintenance Technician Test 2 is an intermediate-level test. Candidates take this test who want a job in a junior position.
This test consists of 75 questions with a time limit of two and half hours. Please check below the number of questions bifurcation along with topics:
Amazon Maintenance Technician Test 3 is a professional-level test. Candidates who want a job in a senior position take this test.
The number of questions is the same as Maintenance Technician Test 2 (75 questions with two and a half hours time limit); however, there is one additional topic along with all topics mentioned in test 2:
If you want to tighten your technical knowledge and heighten your chances of passing the Amazon Tech Test on the first attempt, then check out the complete Amazon Maintenance Technician Test Practice Pack.
The Amazon Maintenance Technician Test is divided into multiple sections. The particular percentage of the questions varies for each sector which depends on the type of test (Amazon tech test 1,2 or 3). Below are the sections that you will find in the test.
Let’s have a look at some of the sample questions from an authentic Amazon Ramsay Test.
What will be the output for pressing and releasing the forward button after some time?
a. M2 will run when the forward button is triggered otherwise, stop once released.
b. M1 will run when the forward button is triggered and keep running once released.
c. M2 will run when the forward button is triggered and keep running once released.
d. M1 will run when the forward button is triggered otherwise stop once released.
M1 is enabled when the forward switch is switched on; on the other hand, when the forward button is released, M1 remains unaffected due to the circuit alignment such that the forward switch is parallel to M1.
For this particular section, you should focus on all circuit test instruments.
Choose the type of relay shown in the picture below:
The correct answer is C.
SPDT is a single pole double throw relay. SPDT schematics are shown in the diagram below:
SPDT consists of three terminals:
Normally closed (NC)
Normally Open (NO)
When you switch off the relay, the NC terminal connects with the COM terminal. Similarly, when you switch on the relay, the NO terminal connects with the NC terminal.
What is the simplest switch that could select two individual outputs from both sets of two circuits?
a. Single-pole, double-throw
b. Single-pole, single-throw
c. Double pole, double throw
d. Double-pole, single-throw
For the PLC program provided below, which Boolean expression is equivalent?
Do you want to solve more Sample questions? If yes, then click here.
Are you still confused about where to start preparing for the exam? Worry not, we have a complete guide to help you through the preparation process.
The passing criteria for the Ramsay Aptitude test are at least 80%. However, it depends on the number of candidates going through the selection process.
The higher the other candidate’s score on the actual test, the higher will be the merit to pass the test. You will need to surpass all test takers to get a higher percentile.
Yes, you can retake the actual test, but you’ll need to wait at least six months before you are accepted for the test again. This will give you much time to get expertise on practice tests.
Amazon has a distinctive screening process. For your convenience, details are provided below:
You need to apply for a relative job on the Amazon site; remember to format your CV according to the job for which you are applying.
After you are done with the application process, you will receive a call from an Amazon recruiter to take the Amazon Ramsay Test. It’s better to be prepared to talk to the recruiter about your experiences.
If you are right for the position, you will be invited to take the Ramsay Mechanical Test, further known as Amazon Tech Test 1, 2, or 3.
If you are able to pass the Amazon Maintenance Tech Test, you will get a call for a job interview. This time you will be asked more technical and scenario-based questions in the interview.
If your interview goes smoothly and you seem to fit well for the job, you will have finished the recruitment process and be offered a job.
At last, you will have to go through some final checks like a drug test and some background checks. If everything goes well, you can now start your job and will be invited to the orientation.
Once you have cleared the test, the Amazon recruiter will contact you and provide a date for an interview. While you are preparing for an interview, you need to focus on the below-mentioned principles:
Amazon has set criteria for all employees to have their leadership principles targets. This includes the rules and attitudes of all Amazon maintenance technicians.
The Amazon interview will be conducted according to a particular format, which is:
Interview Questions are more technical and behavioral. Some of the sample questions are: